YOKOGAWA DR231, Руководство пользователя

Страница: 17 / 256

15
IM DR231-01E
Computation Settings
Parameters Procedure Selecting menu Reference
Computation equation SET key* SET=MATH Section 12.2
Constant SET key* SET=CONST Section 12.3
Perform computation FUNC key** MATH START Section 12.4
Clear measured data and FUNC key** MATH CLR START Section 12.4
perform computation
Stop computation
FUNC key** MATH STOP Section 12.4
Clear incomplete FUNC key** MATH ACK Section 12.4
measurement status
Handling of computation Turn ON power while pressing the DISP key
SET UP=MATH Section 12.5
error/time axis setting of
TLOG SUM
*: Procedure varies according to the menu configuration of the SET key (see section 10.9).
**: Procedure varies according to the menu configuration of the FUNC key (see section 10.8).
Settings for Saving/Loading Measured/Setup Data (Floppy Disk)
Parameters Procedure Selecting menu Reference
Save/Load measured data SET key* SET=MEMORY Section 11.1, 11.2
Save/Load set-up data SET key* SET=FLOPPY Section 11.3, 11.4
of SET mode
Copy measured data
SET key* SET=MEMORY Section 11.5
between built-in RAM
disk and floppy disk
Convert data and copy
SET key* SET=MEMORY Section 11.6
Initialize built-in RAM SET key* SET=MEMORY Section 11.9
disk
Initialize floppy disk
SET key* SET=MEMORY Section 11.10
Save/Load set-up data Turn ON power while pressing the DISP SET UP=FLOPPY Section 11.3, 11.4
of SET UP mode key
*: Procedure varies according to the menu configuration of the SET key (see section 10.9).
Perform Printing
Parameters Procedure Selecting menu Reference
Perform manual print PRINT key MAN PR START Section 7.2
Perform list print PRINT key LIST START Section 7.2
Perform header print PRINT key HEADER START Section 7.2
Perform message print FUNC key* MSG PRINT Section 7.3
Perform setup list print Press the FUNC key for about three seconds* S/U LIST START Section 7.4
*: Procedure varies according to the menu configuration of the FUNC key (see section 10.8).
Other Settings
Parameters Procedure Selecting menu Reference
Timer SET key* SET=TIMER Section 6.1
Event/Action SET key* SET=LOGIC Section 9.1
Copy between channels SET key* SET=COPY Section 9.2
Match time Press the SET key for about three seconds* SET=MATCH TIME Section 6.8
Group Press the SET key for about three seconds* SET=GROUP Section 6.8
Relay, internal switch Turn ON power while pressing the DISP key SET UP=RELAY Section 10.4
operation mode
Burnout
Turn ON power while pressing the DISP key SET UP=BURN OUT Section 10.5
Reference junction Turn ON power while pressing the DISP key SET UP=RJC Section 10.5
compensation
Key lock
Turn ON power while pressing the DISP key SET UP=LOCK Section 10.7
Menu configuration Turn ON power while pressing the DISP key SET UP= Section 10.8
of FUNC key FUNC PARM
Menu configuration Turn ON power while pressing the DISP key SET UP=SET PARM Section 10.9
of SET key
Report function
Turn ON power while pressing the DISP key SET UP=REPORT Section 10.12
Reset timer FUNC key** TIMER RESET Section 9.3
Lock keys FUNC key** KEY LOCK ON Section 9.3
Start report FUNC key** REPORT START Section 10.12
Stop report FUNC key** REPORT STOP Section 10.12
Start report print FUNC key** REPORT RECALL Section 10.12
START
Stop report print FUNC key** REPORT PRINT Section 10.12
START
Clear message buffer Press the FUNC key for about three seconds** MSG BUF CLEAR Section 9.4
Display module settings Press the FUNC key for about three seconds** MODULE INF Section 9.4
Display communication Press the FUNC key for about three seconds** COMM INF Section 9.4
settings
Initialize setting
Press the FUNC key for about three seconds** RAM INIT Section 9.4
information
*: Procedure varies according to the menu configuration of the SET key (see section 10.9).
**: Procedure varies according to the menu configuration of the FUNC key (see section 10.8).
List of Menus and Set-up Data