14
IM DR231-01E
List of Menus and Set-up Data
The following is a list of set-up data, procedures to switch to different setting modes, and setting
menu.
Measurement Condition Settings
Parameters
Procedure
Selecting menu
Reference
Input type, span, linear
RANGE key
001-01:VOLT/2V
Chapter 5
scaling*
1
Units
SET key*
2
SET=UNIT
Section 6.1
Moving average
Press the SET key for about three seconds*
2
SET=MOVE AVE
Section 6.8
Measurement cycle*
1
Turn ON power while pressing the DISP key
SET UP=
Section 10.1
SCAN INTVL
A/D integration time*
1
Turn ON power while pressing the DISP key
SET UP=A/D INTG Section 10.3
Filter*
1
Turn ON power while pressing the DISP key
SET UP=FILTER
Section 10.3
*1: Make sure that the total number of setting changes, including calibrations, does not surpass 100000.
*2: Procedure varies according to the menu configuration of the SET key (see section 10.9).
Chart Speed Settings
Parameters
Procedure
Selecting menu
Reference
Chart speed 1
CHART key
CHART
Section 6.2
Chart speed 2
Press the SET key for about three seconds* SET=CHART2
Section 6.2
*: Procedure varies according to the menu configuration of the SET key (see section 10.9).
Recording Settings
Parameters
Procedure
Selecting menu
Reference
Logging/Analog trend
SET key*
SET=SYSTEM
Section 6.1
switch, dot-printing cycle
Recording channel
SET key*
SET=TREND
Section 6.1
Recording zone
Press the SET key for about three seconds* SET=ZONE
Section 6.3
Partial compression
Press the SET key for about three seconds* SET=PERTIAL
Section 6.3
Tag
Press the SET key for about three seconds* SET=TAG
Section 6.4
Channel to digital print, Press the SET key for about three seconds* SET=DIGITAL PR
Section 6.4
number of rows to print
Channel to manual print Press the SET key for about three seconds* SET=MANUAL PR Section 6.4
Alarm print
Press the SET key for about three seconds* SET=ALARM PR
Section 6.5
Channel to print scale
Press the SET key for about three seconds* SET=SCALE PR
Section 6.6
values
Channel to list print
Press the SET key for about three seconds* SET=LIST PR
Section 6.6
Items to list print
Press the SET key for about three seconds* SET=LIST FMT
Section 6.6
Message
Press the SET key for about three seconds* SET=MESSAGE
Section 6.7
Header
Press the SET key for about three seconds* SET=HEADER
Section 6.7
Title
Press the SET key for about three seconds* SET=TITLE
Section 6.7
Interpolation
Press the SET key for about three seconds* SET=INTERPOL
Section 6.8
Adjust dot-printing
Turn ON power while pressing the DISP key
SET UP=PRN ADJ
Section 10.1
position
Recording format
Turn ON power while pressing the DISP key
SET UP=RECORD
Section 10.2
Dot-print color
Turn ON power while pressing the DISP key
SET UP=COLOR
Section 10.6
*: Procedure varies according to the menu configuration of the SET key (see section 10.9).
Display Settings
Parameters
Procedure
Selecting menu
Reference
Switch display
DISP key and MODE key
--------
Chapter 4
Display update interval
Turn ON power while pressing the
SET UP=DISPLAY
Section 10.10
DISP key
Alarm Settings
Parameters
Procedure
Selecting menu
Reference
Alarm, alarm output
ALARM key
001-01:1/OFF
Section 8.1
relay
Alarm
Turn ON power while pressing the DISP key
SET UP=ALARM
Section 10.3
interval/hysteresis/hold
Execute alarm
FUNC key*
ALARM ACK
Section 9.3
acknowledge
Reset alarm
FUNC key*
ALARM RST
Section 9.3
Clear alarm buffer
Press the FUNC key for about three seconds* ALM BUF CLEAR
Section 9.4
*: Procedure varies according to the menu configuration of the FUNC key (see section 10.8).
Содержание DR231
Страница 12: ...10 IM DR231 01E...