YOKOGAWA CW120 Скачать руководство пользователя страница 107

Страница: 107 / 205

9-7

IM CW120-E

Electric Energy Measurement

TIP

• When setting the integration start date and time, consider the time period you need to finish all actions

for setting the date and time and putting the meter into the integration standby state. (The start date

and time may be passed before finishing the setting.)

• If the start date and time are set to later than (in the future) the stop date and time, the stop date and

time will be changed to the time after the start date and time for the output interval.

• The manual saving action takes precedence over the automatic start setting. Upon pressing the

key

for one second or more to start saving manually, the start date and time settings become ineffective.

• To reset the integration standby state, press any key to return to the measurement screen, and then

press the

key for one second or more. This will cause the

mark to disappear and the LED

status indicator to extinguish.

9.2.2 Stopping Procedures

There are three ways to stop integration:

• Manual stop:

Pressing the

key for one second or more stops

integration. (Use this method to abort integration.)

• Automatic stop at the specified time on the specified date: When the

specified time on the specified date set via the setting

screen is reached, integration stops. (The stop date

and time settings are effective only when integration

has begun automatically at the start date and time set.)

• Remote stop by external control signal: A signal input from the external

control terminals stops integration. For details, see

Section 9.6, “External Control Input/Output.”

Manual Stop

Press the

key for one second or more. Then, the

mark

disappears from the screen, the LED status indicator immediately above the

key extinguishes, and integration stops.

Aborting Integration

To abort integration before the set stop date and time have been reached,

also press the

key for one second or more.

mark disappears.
LED extinguishes.

mark lights.
LED lights.

Integration stop
date and time set

Press for one second
or more to abort

LED status indicator

Integration
in progress

9.2 Starting and Stopping Integration

Содержание CW120














































































































































































































Результаты поиска

Содержание CW120

Отзывы:

Похожие инструкции для CW120

Бренды по названию

Популярные бренды

YOKOGAWA CW120, Руководство пользователя

Результаты поиска

Содержание CW120

Отзывы:

Похожие инструкции для CW120

Бренды по названию

Популярные бренды