26
IM CA310-02EN
Installing and Removing Batteries
WARNING
• Do not remove the batteries with the main unit turned on.
• Never replace the batteries while measurement is in progress.
• Insert batteries with the correct polarity. Otherwise, the batteries may leak, heat up, or burst.
• Do not mix new and old batteries or mix different brands or types of batteries. The batteries may leak, heat up, or burst
due to their characteristic differences.
• When replacing batteries, be sure to remove the lead cables.
French
AVERTISSEMENT
• Ne retirez pas les piles lorsque le boîtier principal est en marche.
• Ne jamais remplacer les batteries lorsque la mesure est en cours.
• Inserer les batteries en observant la polarite correcte. A defaut, les batteries risquent de fuir, de chauffer ou d’eclater.
• Ne pas mélanger des batteries neuves et des batteries usagées, ni des batteries de marques ou de types différents.
Les batteries risquent de fuir, de chauffer ou d’éclater en raison de leurs différentes caractéristiques.
• Lors du remplacement des batteries, veillez a retirer les cables de plomb.
1.
Turn the power off.
2.
Push the battery cover on the rear panel in the direction of the arrow, and open the cover.
3.
Remove the old batteries, and insert new batteries with the correct polarities.
4.
Attach the battery cover. Close the cover completely until you hear a click.
Making Preparations for Measurements
