• Toujours brancher les connecteurs aux bornes d’E/S de manière droite et non
inclinée pour éviter d’endommager ces dernières ou d’endommager les fils des
connecteurs.
• Ne pas appliquer de tension externe aux bornes de sortie.
External Clock Input Terminal (REF CLOCK IN)
If you want to synchronize the XFP interface module with an external clock signal and
use the module to operate a transceiver, apply a reference signal that has a frequency
that is 1/64 of the 10 Gbit/s rate to this terminal.
REF CLOCK IN
(FROM TRIGGER OUT)
Item
Specifications
Connector type
SMA, female
Input level
0.6 Vp-p ± 0.3 V
Frequency
1/64 of the bitrate
Data Output Terminals (DATA OUT and DATA OUT)
These terminals transmit 10 Gbit/s non-inverted and inverted data respectively.
DATA OUT
(TO DATA IN 1)
DATA OUT
Item
Specifications
Connector type
3.5 mm, female
Data format
NRZ
Data Input Terminals (DATA IN and DATA IN)
These terminals receive 10 Gbit/s non-inverted and inverted data respectively.
DATA IN
(FROM DATA OUT)
DATA IN
(FROM DATA OUT)
Item
Specifications
Connector type
3.5 mm, female
Data format
NRZ
3.6 XFP Interface Module
3-11
IM 735101-01EN
External Input and Output
1
2
3
4
5
Index
