manualshive.com logo in svg

YOKOGAWA AQ2200 Series, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ2200 Series Скачать руководство пользователя страница 130

Why It Is Necessary to Clean the Optical Interface

The optical connectors and optical plugs are the only optical components whose optical 
fiber end faces are exposed to the outside. Even a tiny scratch on their end faces that 
cannot be detected by the naked eye greatly affects their optical performance. If optical 
connectors are connected improperly, if they are connected without the removal of 
dust or dirt, or if they are cleaned improperly, the optical connector end faces may be 
damaged.
When connecting optical connectors, you must properly align the ferrule cores of both 
optical connectors. An optical adapter is used for this connection, but if the connection 
is made with dirt or dust attached to the ferrule side face or ferrule guide (sleeve) of the 
optical adapter, the cores cannot be properly aligned. This may lead to problems such as 
optical power loss, transmission mode disturbances, and an increased optical reflection 
at the connection point. Consequently, the instrument will not be able to take proper 
measurements.
To prevent problems such as these, it is necessary to keep the optical connectors clean 
and to make proper connections when connecting optical connectors to measuring 
instruments or to other optical connectors.
When you use this instrument, clean the ferrule every time it is connected and clean the 
precision sleeve at least once every thirty connections. In particular, if you use optical 
connectors such as those described on the following page, we recommend that you 
clean them before every use.

•  Optical connectors are connected after a metallic sleeve has been inserted

→ Particles that are worn off of the metallic sleeve may stick to the ferrule side face or 

end face particularly easily.

•  Optical connectors that have ferrule materials that easily wear out, such as metallic or 

crystallized glass ferrule

→ Ferrule particles may wear off easily from connecting and disconnecting the optical 

connector.

•  Optical connectors and precision sleeves, with which plastic shell type optical 

connectors are repeatedly engaged

→ Plastic particles wear off easily from the repeated engagement of the shell.

Enlarged photo of a good optical 

connector connection

Enlarged photo of a scratched optical 

connector connection

4.5  Routine Maintenance

4-28

IM 735101-01EN

Содержание AQ2200 Series
























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды