manualshive.com logo in svg

YOKOGAWA AQ2200 Series, Руководство пользователя

Серия Yokogawa AQ2200 - это высокотехнологичные измерительные приборы, предназначенные для различных областей применения. Чтобы получить пользовательское руководство бесплатно, загрузите его с manualshive.com. Наслаждайтесь функциональностью и надежностью этих приборов для успешного выполнения измерительных задач.

Поделиться
Скачать
background image

Sensor Module

Code Error Message

Description

Corrective Action

1200 Memory Check 

Error

An error occurred during the memory 

check.

Restart the instrument.

If the same message continues to appear, servicing is required.

1201 Flash Rom Write 

Error

An error occurred during writing to 

the flash ROM.

Restart the instrument.

If the same message continues to appear, servicing is required.

1202 Header Error

The sensor head type could not be 

detected correctly.

Restart the instrument.

If the same message continues to appear, servicing is required.

1203 Temperature Error The internal temperature is too high. Turn the power off and confirm that the frame controller’s inlet 

and exhaust holes are not blocked. After waiting for some time, 

restart the instrument. If the same message continues to appear, 

servicing is required.

1204 Update Error

A failure occurred during a firmware 

update.

Restart the instrument.

If the same message continues to appear, servicing is required.

1206 No Head

The sensor head is not connected.

Check that the sensor head is firmly connected.

1207 Temperature  

Limit Error

The internal temperature is abnormal. Turn the power off and confirm that the frame controller’s inlet 

and exhaust holes are not blocked. After waiting for some time, 

restart the instrument. If the same message continues to appear, 

servicing is required.

1208 Head Voltage 

Error

The seneor head voltage is abnormal. Restart the instrument.

If the same message continues to appear, servicing is required.

1209 Head 

Communication 

Error

Communication error with the sensor 

head.

Restart the instrument.

If the same message continues to appear, servicing is required.

1210 Head Flash Read 

Error1

An error occurred during reading data 

from the flash ROM.

Restart the instrument.

If the same message continues to appear, servicing is required.

1211 Head Flash Read 

Error2

An error occurred during reading data 

from the flash ROM.

Restart the instrument.

If the same message continues to appear, servicing is required.

1212 Head Flash Read 

Error3

An error occurred during reading data 

from the flash ROM.

Restart the instrument.

If the same message continues to appear, servicing is required.

1213 Unknown Head 

Error

The instrument could not detect the 

model No. for sensor head.

Update the firmware on the frame controller and the module. 

If the same message continues to appear, servicing is required.

Contact your local YOKOGAWA dealer for the latest version of 

the firmware.

1260 PD Module Error1 The Peltier temperature is abnormal. Turn the power off and confirm that the frame controller’s inlet 

and exhaust holes are not blocked. After waiting for some time, 

restart the instrument. If the same message continues to appear, 

servicing is required.

1261 PD Module Error2 The Peltier current is abnormal.

Turn the power off and confirm that the frame controller’s inlet 

and exhaust holes are not blocked. After waiting for some time, 

restart the instrument. If the same message continues to appear, 

servicing is required.

1262 PD Module Error3 The Peltier control IC temperature is 

abnormal.

Turn the power off and confirm that the frame controller’s inlet 

and exhaust holes are not blocked. After waiting for some time, 

restart the instrument. If the same message continues to appear, 

servicing is required.

1263 Zero set Error1

Light was not cut off during the zero-

set procedure.

After checking that light can be cut off, execute the zero-set 

procedure again.

1264 Zero set Error2

There is a problem with the hardware. Reset the instrument, and then execute the zero-set procedure.

If the same message continues to appear, servicing is required.

1265 OPT Mode Error An optical signal was applied that 

has a frequency that is different from 

the frequency that was set in CHOP 

mode.

Check the CHOP frequency settings.

1266 Input Power Over An optical signal was applied that 

exceeds the maximum optical input 

level.

Set the optical input power to a value that is less than or equal 

to the maximum optical input level.

1267 Range Over

The optical input level is higher than 

the upper limit of the measurement 

range.

Adjust the measurement range so that the range bar on the 

Detail screen of the frame controller’s sensor module becomes 

black. When the Range Over error occurs, the range bar is 

orange.

1268 A/D Read Error

There is a problem with the sensor 

module hardware.

Restart the instrument.

If the same message continues to appear, servicing is required.

1269 Trigger Ignored

A remote measurement command 

was received during trigger input 

mode.

Check the measurement mode.

4.2  Error Messages

4-11

IM 735101-01EN

Troubleshooting, Maintenance, and Inspection

1

2

3

4

5

Index

Содержание AQ2200 Series
























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AQ2200 Series

rainforest EMU Quick Start Manual preview
EMU
Бренд: rainforest Страницы: 2
AEMC MN307 User Manual preview
MN307
Бренд: AEMC Страницы: 4
ASCEL Electronic AE20401 Assembly And Operation Manual preview
AE20401
Бренд: ASCEL Electronic Страницы: 64
ELGO Electronic EMIX2 series Operating Manual preview
EMIX2 series
Бренд: ELGO Electronic Страницы: 24
OPTICOM OPERA CONTROL CENTER SERVER - V 3.5 User Manual preview
OPERA CONTROL CENTER SERVER - V 3.5
Бренд: OPTICOM Страницы: 21
Interacoustics AT235 Service Manual preview
AT235
Бренд: Interacoustics Страницы: 54
PCB Piezotronics 3501A2020KG Installation And Operating Manual preview
3501A2020KG
Бренд: PCB Piezotronics Страницы: 10
Kawai CP67 Owner'S Manual preview
CP67
Бренд: Kawai Страницы: 36
Kabelmat MESSBOI 25 Operating Manual preview
MESSBOI 25
Бренд: Kabelmat Страницы: 27
Sage RIO SIX Instruction Manual preview
RIO SIX
Бренд: Sage Страницы: 75
wattwatchers Auditor 6W Quick Start Manual preview
Auditor 6W
Бренд: wattwatchers Страницы: 14
X-Rite Ci7860 Series User Manual preview
Ci7860 Series
Бренд: X-Rite Страницы: 54
XS Instruments 60 VioLab Series Instruction Manual preview
60 VioLab Series
Бренд: XS Instruments Страницы: 41
Toner OLS1315A User Manual preview
OLS1315A
Бренд: Toner Страницы: 7
BART LAB-DFP Operating Manual preview
LAB-DFP
Бренд: BART Страницы: 24
Parker SensoControl ServiceJunior Series Operating Instructions Manual preview
SensoControl ServiceJunior Series
Бренд: Parker Страницы: 148
Stahl 8402/6 Series Operating Instructions Manual preview
8402/6 Series
Бренд: Stahl Страницы: 47
Parker PFM1 Series Installation And Operation Manual preview
PFM1 Series
Бренд: Parker Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды