YOKOGAWA AQ2160-02, Руководство пользователя, Страница: 66 / 73

58
Reference Value Out of Range Error
Displayed when the measured value used for
setting or updating the relative measurement
reference value is outside the valid range.
Exceeds the upper limit: High level error.
Falls below the lower limit: Low level error.
Low Battery Error
Displayed when attempting to save or delete
data while the battery indicator is displayed.
The error appears for one second, then the
screen returns to the previous screen.
CAL Value Automatic Setting Error
1) Displayed when attempting to automatically
set the CAL value a second time during
relative value measurement. Clear the
CAL value (see section 3-6-3).
2) Displayed when the instrument attempts to
automatically set a CAL value outside the
valid range (-10.00 dB–25.00 dB).
Change the fixed optical attenuator to one
having an amount of attenuation that will
bring the CAL value into the valid range.
Resume Error
If the Resume value was not saved
successfully, the Resume error appears the
next time the instrument is started. Press the
ENTER key for normal measurement mode.
Or, turn OFF the power switch and restart.
The system reset initial value is set (see
section 2-5-5).
Calibration Value Error
Displayed when, for some reason, the
instrument's internal calibration value
becomes corrupted during use.
Have the instrument repaired immediately.
nm
CW PWR SAVE
nm
CW PWR SAVE PWR SAVE
kHz nm
PWR SAVE
kHz nm
PWR SAVE PWR SAVE
PWR SAVE
B
PWR SAVE PWR SAVE
B B
PWR SAVE PWR SAVE PWR SAVE