YOKOGAWA AQ2160-02 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 73

YOKOGAWA AQ2160-02 Скачать руководство пользователя страница 13

5

Do not plug too many cords into a single power supply outlet.
=> Heating of the cables or fire can result.

Never bend, twist, or pull cables forcefully.
=> Fire or electric shock can result.

If the power cord becomes damaged, have it replaced
immediately by the dealer from which you purchased the
instrument.
=> Otherwise fire or electric shock can result.

Never plug in or unplug the power cord with wet hands.
=> Electric shock can result.

Insert the power plug securely into the power outlet.
=> If metal or other objects are allowed to contact the plug,
fire or electric shock can result.

When unplugging the power cord always pull by the plug,
never pull by the cord itself.
=> Pulling the power cord can cause damage leading to fire or
electric shock.

Always unplug the power cord from the outlet, and check that
all externally connected wires and cables are removed before
moving the instrument.
=> Otherwise, the cords can become damaged, causing fire
or electric shock.

For safety, always unplug the power cord from the outlet
during periods of extended non-use. Also, be sure to unplug
the power cord from the outlet during lightning storms.
=> Fire, electric shock, or malfunction can result.

Do not use batteries that are not specified for this instrument.
Also, do not use old and new batteries at the same time.
=> Explosion or leakage of the batteries can result, casuing
fire, injury, or contamination of the surrounding area.

WARNING

«
...
11
12
13
14
15
...
»

Содержание AQ2160-02










































































Отзывы:

Нет отзывов