YOKOGAWA AQ2160-02 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 73

YOKOGAWA AQ2160-02 Скачать руководство пользователя страница 6

’

v

3.    Limitation for Specific Uses
(1)    Except in the case that the Licensee and Yokogawa agreed in writing
separately, the Software is not designed and/or made specially for the
purpose of service of aircraft or ships or support on the ground, or planning
for, design for, construction of, maintenance of, operation of or use at
facilities of nuclear and atomic energy.

(2) When the Licensee uses the Software for the purposes described in
the preceding Article 3 (1) , Yokogawa shall not bear any and all liability and
responsibility for claims and losses arising out of or in relation to such uses.

4. Up-Grade and Revision-Up
When the Licensee receives the up-grade or the revision-up for the
Software from Yokogawa, the Licensee shall, without delay, install such
up-grade or revision-up in the computer(s) on which the Licensee uses the
Software.    Further, the up-grade or the revision-up which is substituted for
or is added to the Software shall be considered as the Software and the
Licensee shall agree to comply with the terms and conditions of this
Agreement in order to use such up-grade or revision-up.

5. Intellectual Property Infringement
When any third party should demand injunction, initiate a law suit, or
demand damages under patent right, utility model right, design patent right,
trademark right, copyright and/or any other rights relating to any of the
Software including related materials or when, at Yokogawa's judgment,
there is possibility of such assertion as stated above, Yokogawa shall be
entitled to, at Yokogawa's discretion, take any of the following
countermeasures.

a. To acquire the necessary right from a third party which has lawful
ownership of the right so that the Licensee will be able to continue to use
such Software;
b. To replace such Software with the one, which avoids the infringement;
c. To remodel such Software so that such Software can avoid the
infringement of such third party's right; or
d. To terminate this Agreement and end granting to use such Software.

6. WARRANTY DISCLAIMER
YOKOGAWA PROVIDES THE LICENSEE WITH THE SOFTWARE ON AN
"AS IS" BASIS, WITHOUT ANY KIND OF WARRANTY AND
REPRESENTATION, WHETHER EXPRESS OR IMPLIED. THE
LICENSEE SHALL INDEMNIFY AND HOLD YOKOGAWA HARMLESS

«
...
4
5
6
7
8
...
»

Содержание AQ2160-02










































































Отзывы:

Нет отзывов