YOKOGAWA AQ2160-02 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 73

YOKOGAWA AQ2160-02 Скачать руководство пользователя страница 12

4

When using an AC power supply for this instrument, always
use the AC adapter that came with the instrument.  Never
use the AC adapater with any other instrument.  Doing so
could result in damage or injury.
=> Fire, electric shock, or malfunction can result.

Do not use a power supply other than the one specified.
Also, do not use with power supply voltages other than those
indicated by this manual.
=> Fire, electric shock, or malfunction can result.

When connecting the instrument to commercial power,
connect directly to a dedicated power outlet. Do not use
extension cords as they can overheat and cause fire.

Do not bring the power cord near any hot objects.
=> The coating on the cord can deteriorate, causing fire or
electric shock.

Do not impair, damage, or attempt to modify the power cord.
=> Fire or electric shock can result.

Never place spent batteries in fire.
=> Explosion, fire, or burns can result.

Do not insert or drop any metal objects into any openings on
the instrument, or inside the instrument.
=> Fire, electric shock, or malfunction can result.

The sensor element of this instrument contains indium gallium
arsenide (InGaAs). InGaAs powder and vapor is dangerous.
Therefore, never incinerate, destroy, break, grind, or apply
chemicals to the instrument. Keep separate from general
industrial or household waste, and dispose of the instrument
according to relevant local laws.

DANGER

«
...
10
11
12
13
14
...
»

Содержание AQ2160-02










































































Отзывы:

Нет отзывов