YOKOGAWA AQ2160-02 Скачать руководство пользователя страница 17

Страница: 17 / 73

User calibration
function

Sets a correction value for the amount of
attenuation in any fixed optical attenuators used in
combination with the instrument.

Power supply

Two AA batteries (alkaline dry cells or nickel
metal-hydride rechargable batteries)

Operating
environment

Operating temperature: 0–50°C
Storage temperature: -25–+70°C
Relative humidity: 85% or less (no condensation)

Weatherproofing Conforms

JIS C 0920 (drip-proof) TYPE I and

IEC 60529 Ipx1 (the drip test)

Dimensions and
weight

Approximately 75 (W) x 152 (H) x 32 (D) mm and
approximately 250 grams (main unit only)

Safety/EMC

Safety: EN61010-1
(Out of conformance since December 1, 2010.)
EMC: EN61326-1 ClassB, Table2 (for use in
industrial locations)

1. Connector type. Specify FC, SC, LC, MU, or ST.

2. The user calibration function setting varies depending on the fixed

optical attenuator used.

3. Ta = 23 ± 5°C, at reference conditions (@ 1310 nm, -20 dBm).

Excluding when setting the user calibration function.

4. Do not remove the batteries or unplug the AC adapter during

operation.

5. By connecting to a PC on which the USB application software is

installed, saved data can be output in CSV format.

6. Measurement up to +30 dB is possible when using a 20 dB fixed

optical attenuator (that supports 1 W).

7. When connecting to the AQ2160-02, use a temperature range of

0–+50 °C. However, the safety standard for the AC adapter
specifies an operational temperature of 0–40°C.

8. With the optical input connector cap and DC connector cap

completely attached (without gaps).

9. When using USB, use a shielded USB cable of 2 meters in length or

less. Attach a ferrite core (TDK: ZCAT1325-0530A or equivalent)
on one end of the USB cable, close to the instrument’s USB
connector.

1-8. Periodic Calibration

Periodic calibration is an effective way to maintain the normal

functionality of the instrument over long periods of time, and to enable
quick identification of any problems. It is recommended to perform
calibration of the instrument once per year.

Содержание AQ2160-02










































































Результаты поиска

Содержание AQ2160-02

Отзывы:

YOKOGAWA AQ2160-02, Руководство пользователя, Страница: 17 / 73

Результаты поиска

Содержание AQ2160-02

Отзывы: