IM AQ1210-02EN
45
Setting Display Conditions (OTDR)
2.3, “Display (OTDR) Conditions” in the User’s Manual
1.
Tap
OTDR
on the MENU screen.
2.
Press
SETUP
to display the setup screen.
3.
Tap the
OTDR
tab to display the following screen.
OTDR tab
Set the marker type (Marker, Line).
Marker:
Line:
Ghost cursor display on/off
Checks secondary reflections
Set the calculation method for
total loss (Cumulate loss, Loss
between S and E).
Cumulate: Integrated value of events
Between two points: Loss between
S and E
Configure the work completion notification.
Configure settings that indicate that the optical fiber cable being
installed has reached the destination with an alarm or the like.
Turns approximated line display on or off
Displays an approximated line for waveform events.
Select the measurement
distance unit
This menu is not available
on -HJ suffix code.
Calculation method for
total return loss (Include
END, Exclude END).
Set the zoom method.
Select the zoom behavior of the
waveform display that is controlled
with the arrow keys.
Locks screen operations
Screen operations can be
locked after a given time
elapses.
1 2
3
Select the cumulate loss type
(Type1, Type2, Type3)
Select the calculation method for
cumulate loss.
END point loss display
(ON, OFF)
Select the reflection term
(Return Loss, Reflection
level)
This menu is available on
-HJ suffix code.
Marker information display
(OFF, ON)
Display the loss and the distance
from the measurement reference
point to each marker on the waveform
display area.
Distance decimal places
(**.***, **.****, **.*****)
Cursor dB value display
(ON, OFF)
dB decimal places(**.*, **.**, **.***)
Setup
