Yingang YG125-30B, Руководство пользователя

Страница: 91 / 151

YG125-30B Maintenance Manual Crankcase, crankshaft and Shift mechanism
97
Crank-shaft
Balance shaft
2. Remove the balance shaft.
3. Remove the crankshaft.
Notice:
While removing, you may strike the balance shaft and
crankshaft gently; however, always avoid damaging
them.
To mount the crankshaft and balance shaft:
1. Place the right hand crankcase assembled with
variable transmission system (driving/driven shaft,
etc.) on the assembly operating table, and use a
high power electric drier to heat the right crankcase
body crankshaft bearing until the temperature at the
inner circle of the bearing reaches 106
℃
, and then
assemble the crankshaft.
2. Use a high power electric drier to heat the right
crankcase body balance shaft bearing until the
temperature at the inner circle of the bearing
reaches 106
℃
, and then assemble the balance shaft.
Remember to align the markers on the driving and
driven gears.
3. Mount the left hand crankcase (See
“
Installation of
crankcase").
Notice:
Only assemble when the temperature reaches 106
℃
,
otherwise it can
’
t be assembled. Never savagely
strike it!
The markers on the driving and driven gears must be
aligned.
Removal and installation of crankshaft and balance shaft
Electric drier
Balance shaft Crank-shaft
Aligning the markers
3
2
1