YILMAZ PCC 6505, Руководство пользователя

Страница: 44 / 87

44

Calibration is performed in this screen on section.

Enter the maximum stroke that saw can reach along Z- axis in section.

Place a work piece on the table whose height is measured.

By using the buttons, lower the saw until it touches on the work piece.

Remove the work piece and lower the saw about the height of work piece.

Press on saw height calibration button.

The value appears automatically in section.

Remove the work piece from the table.

By using the buttons, lower the saw about the height of work piece. The new position of the
saw is its ground zero.

Press on saw height calibration button.

The value appears automatically in section.
7.6.3 Saw Angle Calibration

Enter the cutting speed of saw in section.

Enter the acceleration of saw while turning to required angle in section.

Enter the deceleration of saw while turning to required angle in section.

Identify the reference of saw before starting angle calibration.

First calibrate the angle of 45 degrees.

Use the section for 45 degrees calibration.

By using the buttons, lower the saw to which the adjusting miter can be placed.

Press on button on the screen.