BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE
20-BD5561-00
©
2018 BROADSOFT INC.
PAGE 52 OF 117
##########################################################################
#############
## RTCP-XR
##
##########################################################################
#############
voice.rtcp_xr.enable =
phone_setting.rtcp_xr_report.enable =
phone_setting.vq_rtcpxr.session_report.enable =
phone_setting.vq_rtcpxr.interval_report.enable =
phone_setting.vq_rtcpxr_interval_period =
phone_setting.vq_rtcpxr_moslq_threshold_warning =
phone_setting.vq_rtcpxr_moslq_threshold_critical =
phone_setting.vq_rtcpxr_delay_threshold_warning =
phone_setting.vq_rtcpxr_delay_threshold_critical =
phone_setting.vq_rtcpxr.states_show_on_web.enable =
##########################################################################
#############
## Auto Provisioning
##
##########################################################################
#############
#Enable or disable the Plug and Play feature; 0-Disabled, 1-
Enabled(default);
static.auto_provision.pnp_enable =
#Enable or disable the phone to check new configuration when powered on;
0-Disabled, 1-Enabled (default);
static.auto_provision.power_on =
#Enable or disable the phone to check the new configuration repeatedly; 0-
Disabled (default), 1-Enabled;
static.auto_provision.repeat.enable =
#Configure the interval (in minutes) the phone repeatedly checks the new
configuration. The default is 1440.
static.auto_provision.repeat.minutes =
#Enable or disable the phone to check the new configuration weekly; 0-
Disabled (default), 1-Enabled;
static.auto_provision.weekly.enable =
#Configure the week time the phone checks the new configuration.
Applicable when the auto provisioning mode is configured as weekly or
power on + weekly.
static.auto_provision.weekly.dayofweek =
static.auto_provision.weekly.begin_time =
static.auto_provision.weekly.end_time =
#Configure the URL of the auto provisioning server.
static.auto_provision.server.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA
CCESSURI%
#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default);