BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE
20-BD5561-00
©
2018 BROADSOFT INC.
PAGE 95 OF 117
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-
AUTO+SIP INFO;
account.6.dtmf.type =
#Configure the RFC2833 payload. It ranges from 96 to 225, the default
value is 101.
account.6.dtmf.dtmf_payload =
#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-
Relay (default), 2-DTMF, 3-Telephone-Event;
account.6.dtmf.info_type =
account.6.auto_dial_num =
account.6.auto_dial_enable =
account.6.cid_source_privacy =
account.6.cid_source_ppi =
account.6.cp_source =
voice_mail.number.6 = %BWVOICE-PORTAL-NUMBER-6%
account.6.shared_line = %BWSHAREDLINE-BINARY-6%
account.6.transfer_refer_to_contact_header.enable =
##########################################################################
#############
## Failback
##
##########################################################################
#############
account.6.naptr_build =
account.6.fallback.redundancy_type =
account.6.fallback.timeout =
account.6.sip_server.1.address = %BWHOST-6%
account.6.sip_server.1.port =
account.6.sip_server.1.expires =
account.6.sip_server.1.retry_counts =
account.6.sip_server.1.failback_mode =
account.6.sip_server.1.failback_timeout =
account.6.sip_server.1.register_on_enable =
account.6.sip_server.1.transport_type = %TRANSPORT%
account.6.sip_server.2.address =
account.6.sip_server.2.port =
account.6.sip_server.2.expires =
account.6.sip_server.2.retry_counts =
account.6.sip_server.2.failback_mode =
account.6.sip_server.2.failback_timeout =
account.6.sip_server.2.register_on_enable =
account.6.sip_server.2.transport_type = %TRANSPORT%
account.6.dns_cache_type =
account.6.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
## NAT Settings
##
##########################################################################
#############