BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE
20-BD5561-00
©
2018 BROADSOFT INC.
PAGE 67 OF 117
#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-
Relay (default), 2-DTMF, 3-Telephone-Event;
account.1.dtmf.info_type =
account.1.auto_dial_num =
account.1.auto_dial_enable =
account.1.cid_source_privacy =
account.1.cid_source_ppi =
account.1.cp_source =
voice_mail.number.1 = %BWVOICE-PORTAL-NUMBER-1%
account.1.shared_line = %BWSHAREDLINE-BINARY-1%
account.1.transfer_refer_to_contact_header.enable =
##########################################################################
#############
## Failback
##
##########################################################################
#############
account.1.naptr_build =
account.1.fallback.redundancy_type =
account.1.fallback.timeout =
account.1.sip_server.1.address = %BWHOST-1%
account.1.sip_server.1.port = 5060
account.1.sip_server.1.expires = 3600
account.1.sip_server.1.retry_counts =
account.1.sip_server.1.failback_mode =
account.1.sip_server.1.failback_timeout =
account.1.sip_server.1.register_on_enable =
account.1.sip_server.1.transport_type = %TRANSPORT%
account.1.sip_server.2.address =
account.1.sip_server.2.port =
account.1.sip_server.2.expires =
account.1.sip_server.2.retry_counts =
account.1.sip_server.2.failback_mode =
account.1.sip_server.2.failback_timeout =
account.1.sip_server.2.register_on_enable =
account.1.sip_server.2.transport_type = %TRANSPORT%
account.1.dns_cache_type =
account.1.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
## NAT Settings
##
##########################################################################
#############
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
account.1.nat.nat_traversal =
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default);
account.1.nat.udp_update_enable =
#Specify the keep-alive interval (in seconds), the default value is 30.