BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE
20-BD5561-00
©
2018 BROADSOFT INC.
PAGE 106 OF 117
account.8.ptime =
#Enable or disable the phone to subscribe to the voicemail through the
message waiting indicator; 0-Disabled (default), 1-Enabled;
account.8.subscribe_mwi_to_vm =
#Enable or disable the phone to send the MAC address in the Register
message; 0-Disabled (default), 1-Enabled;
account.8.register_mac =
#Enable or disable the phone to send the line number in the Register
message; 0-Disabled, 1-Enabled (default);
account.8.register_line =
#Configure the interval (in seconds) the phone retries to register when
account 1 fails to register. It ranges from 0 to 1800, the default value
is 30.
account.8.reg_fail_retry_interval =
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-
AUTO+SIP INFO;
account.8.dtmf.type =
#Configure the RFC2833 payload. It ranges from 96 to 225, the default
value is 101.
account.8.dtmf.dtmf_payload =
#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-
Relay (default), 2-DTMF, 3-Telephone-Event;
account.8.dtmf.info_type =
account.8.auto_dial_num =
account.8.auto_dial_enable =
account.8.cid_source_privacy =
account.8.cid_source_ppi =
account.8.cp_source =
voice_mail.number.8 = %BWVOICE-PORTAL-NUMBER-8%
account.8.shared_line = %BWSHAREDLINE-BINARY-8%
account.8.transfer_refer_to_contact_header.enable =
##########################################################################
#############
## Failback
##
##########################################################################
#############
account.8.naptr_build =
account.8.fallback.redundancy_type =
account.8.fallback.timeout =
account.8.sip_server.1.address = %BWHOST-8%
account.8.sip_server.1.port =
account.8.sip_server.1.expires =
account.8.sip_server.1.retry_counts =
account.8.sip_server.1.failback_mode =
account.8.sip_server.1.failback_timeout =
account.8.sip_server.1.register_on_enable =
account.8.sip_server.1.transport_type = %TRANSPORT%
account.8.sip_server.2.address =
account.8.sip_server.2.port =