Yealink Verizon One Talk W60B, Руководство по настройке

Страница: 38 / 117

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE 20-BD5561-00
©
2018 BROADSOFT INC. PAGE 38 OF 117
Figure 12 Device Access FQDN
7)
Click the Files and Authentication link and then select the option to rebuild all the
system files.
Firmware files must be obtained from Yealink. These files are not included in the
import. Complete the steps in section
5.2.2.2.2.3 Static Files
to define the static
firmware files and to upload the firmware.
NOTE : The non-firmware static files in section 5.2.2.2.2.3 Static Files are included in the import.
8)
After importing the DTAFs, restart the Application Server to load the
TimeZoneAlias
files.
5.2.2.2 Configuration Method 2: Manual
This section identifies the manual steps necessary to configure BroadWorks to add the
Yealink W60B IP DECT PHONE as a Device Management-enabled device type. This
method should not be used except in special cases as described in the opening to section
5.2.2 Configure BroadWorks Device Profile Type .
For more detailed instruction on manual configuration, see the
BroadWorks CPE Kit
Usage Guide
[8] and the
BroadWorks Device Management Configuration Guide
[2] .
The steps in this section can also be followed to update previously imported or configured
device profile type(s) with new configuration files and firmware.
If there are DTAFs for more than one device model, these steps must be completed for
each model.
5.2.2.2.1 Create or Modify Device Profile Type
This section identifies the BroadWorks device profile type settings relevant to Device
Management for the Yealink W60B IP DECT PHONE.