Yealink T46G Skype For Business Edition, Руководство администратора, Страница: 249 / 421

Configuring Advanced Features
235
Parameters Permitted Values Default
network.lldp.packet_interval Integer from 1 to 3600 60
Description:
Configures the interval (in seconds) for the Skype for Business phone to send the LLDP
(Linker Layer Discovery Protocol) request.
Note:
It works only if the value of the parameter “network.lldp.enable” is set to 1 (Enabled).
If you change this parameter, the Skype for Business phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->LLDP->Packet Interval (1~3600s)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->LLDP->Packet Interval
To configure LLDP via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
LLDP
block, select the desired value from the pull-down list of
Active
.
3.
Enter the desired time interval in the
Packet Interval (1~3600s)
field.
4.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5.
Click
OK
to reboot the Skype for Business phone.