YASKAWA SI-T3 MECHATROLINK-II A1000 Series, Техническое руководство

Страница: 7 / 48

2 Overview
YASKAWA SIEP C730600 86F MECHATROLINK-II Technical Manual 7
Product Series Model (s) Software Version *1
GA500
*3
CIPR-GA50xxxxx ≥1010
GA700
*3
CIPR-GA70xxxxx ≥1010
GA800
*3
CIPR-GA80xxxxx ≥9010
CR700
*3
CIPR-CR70xxxxx ≥1012
CH700
*3
CIPR-CH70xxxxx ≥1012
*1 Refer to “ PRG ” on the drive nameplate for the software version number.
*2 Before you install the option on a YASKAWA AC Drive U1000 or Z1000U, make sure that the option software version is PRG: 6107
or later.
*3 Before you install the option on a YASKAWA AC Drive GA500, GA700, GA800, CR700, or CH700, make sure that the option
software version is PRG: 6108 or later.
Note:
•
Refer to the option package labeling in the field designated
“
PRG
”
(four digit number)
”
or the option labeling in the field designated
“
C/
N (S + four digit number)
”
to identify the option software version.
• For Yaskawa customers in the North or South America region:
If your product is not listed in
Table 2.1 , refer to the web page below to confirm this manual is correct for your product. The web page
provides a list of option manuals by product, and a direct link to download a PDF.
Scan QR code Or refer to: http://www.yaskawa.com/optionlookup
◆
Install the Option on a GA500 Drive
An option card mounting kit is necessary to install the option on a GA500 drive. The option card mounting kit
model is: JOHB-GA50. This kit is sold separately.
Refer to the option card mounting kit manual for more information about installation.
A - Option
B - Option card mounting kit
components (sold separately)
C - Drive front cover
Figure 2.1 Option Card Mounting Kit (JOHB-GA50)