8
YASKAWA EUROPE GMBH
YEU SIEP C710616 86A - AC Drive A1000 Option Powerlink - Technical Manual
4 Powerlink Option Components
4
Powerlink Option Components
Powerlink Option
Figure 1
Figure 1 Option Card
For details on the LEDs, refer to
Powerlink Option Status LEDs on page 8
.
Communication connector
The Powerlink Option is connected to the network using a RJ45 connector. The pin assignment is explained in
Table 3 Communication connector (RJ45)
Powerlink Option Status LEDs
The Powerlink Option has four LEDs that indicate the communication status. The indications conform with DS301 and DS303: Indicator
Specification.
LEDs L/A 1 and L/A 2: Ethernet Link/Activity 1 and 2
The Link/Activity indicators show the status of the physical link and show activity on the link period
S/E LED
A green lit Powerlink S/E LED indicates the status of the Powerlink network state machine.
A red lit Powerlink S/E LED indicates error on the EPL network side.
MS LED
The red Powerlink MS LED indicates the presence of any errors.
1 – Communication cable connector
(RJ45)
5 – LED (S/E)
6 – LED (MS)
2 – Ground terminal (installation hole)
7 – LED (L/A 2)
3 – Model number
8 – LED (L/A 1)
4 – Installation hole
9 – Connector (CN5)
Powerlink Connector
Pin
Signal
Description
1
TD+
Send data
2
TD-
3
RD+
Receive data
4
–
N.C. (Pins denoted as N.C. do not connect to any signal)
5
–
N.C. (Pins denoted as N.C. do not connect to any signal)
6
RD-
Receive data
7
–
N.C. (Pins denoted as N.C. do not connect to any signal)
8
–
N.C. (Pins denoted as N.C. do not connect to any signal)
Housing
–
Shield
Underside
9
Looking from the connector
1
4
5
6
8 7
2
3
12
SI-EL3
SI-EL3
