PVI 50/60 TL Installation and Operation Manual (Rev C)
DOCR-070645-E
Page 21 of 102
4) Mounting the Inverter onto the Bracket
(1) Mark the 8 holes on the bearing surface for mounting the bracket as shown in
Figure 2.5;
Figure 2.5 - Holes on the Bearing Surface Dimensions
(2) Drill holes at the marked positions with a 10mm (0.4in.) drill and put the
M8
expansion tubes ①
into the holes; assemble and fasten the
mounting brackets
②
with the
M8x25 assembling bolts ③
in the accessory kit. Figure 2.6.
Tool: Electric drill (Ф10mm/0.4in. head), 13mm wrench 240 in-lbs
Figure 2.6 – Drilling holes for mounting hardware
4.5”