YASKAWA MEMOCON GL120, Руководство пользователя

Страница: 271 / 308

6 Installation and Wiring
6.4.3 DC Input Modules
6-44
Input Device Open collector output (V1
>
V2)
Connection Can be connected. The voltage resistance of the output transistor in the input
device must be 40 V or more.
Input Device Output with a diode (V1
>
V2)
Connection Cannot be connected. When the input device is OFF, current indicated by the dot-
ted line in the figure on the left may flow, and the input may
not turn OFF.
Input Device Output with a resistor and LED (V1
>
V2)
Connection Cannot be connected. When the input device is OFF, current indicated by the dot-
ted line in the figure on the left may flow and apply reverse
voltage to the LED, possibly damaging the LED.
V1: Input signal power supply
V2: Input device power supply
DC Input Module
+Common 1
Photocoupler
Input
Input device
V1
24 VDC
V2
12 VDC
9
V1: Input signal power supply
V2: Input device power supply
DC Input Module
+Common 1
Photocoupler
Input
Input device
V1
24 VDC
V2
12 VDC
9
V1: Input signal power supply
V2: Input device power supply
DC Input Module
+Common 1
Photocoupler
Input
Input device
V1
24 VDC
V2
12 VDC
9