YASKAWA CIMR-MC5A2011, Инструкция по эксплуатации, Страница: 166 / 294

Advanced Operation
7.3.4 Option Constants: F
- 28
J Digital Reference Card: F3-01
D When using a DI-08 or DI-16H2 Digital Reference Card, set constant b1-01 (reference selection) to
“3” (option) and set the input method with constant F3-01.
User
Change
during
Setting Factory
Valid Access Levels
User
Constant
Number
Name
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
Open Loop
Vector
Flux Vector
F3-01 Digital input option 0 to 7 -- 0 B B
D
Settings
Setting Description
0 BCD 1% unit
1 BCD 0.1% unit
2 BCD 0.01% unit
3 BCD 1 Hz unit
4 BCD 0.1 Hz unit
5 BCD 0.01 Hz unit
6 BCD special setting (5-digit input) (Only when DI-16H2 is used.)
7 Binary input (Setting is displayed in decimal notation.)
D
The maximum frequency (100% speed) reference will be used when the binary input is set (setting:
7) and all bits are “1.”
x DI-08: Maximum output frequency reference (255/100%).
x
DI-16H2: Maximum output frequency reference (16 bits: 30000/100%, 12 bits: 4095/100%).
D
Setting 6, BCD special setting (5-digit input), is valid only when the D1-16H2 is used. Using this set-
ting, a frequency from 0.00 to 399.98 Hz can be set in BCD. The data input method is different from
that for settings of 1 to 5.
Setting: 1 to 5
Sign 8 10
3
4 10
3
2 10
3
1 10
3
8 10
0
4 10
0
2 10
0
1 10
0
Setting: 6
2 10
4
1 10
4
8 10
3
4 10
3
2 10
3
1 10
1
8 10
0
4 10
0
2 10
0
D
The sign bit is used as a data bit, so only positive (plus) data can be set.
D
The second digit below the decimal point is set by bits 8x10
0
, 4x10
0
, and 2x10
0
, so the settings are
made in units of 0.02 Hz. (If these three bits are “111,” “110,” and “101,” they will be recognized as
“9.”)
J Analog Monitor Card: F4-01 to F4-04
D
When using an AO-08 or AO-12 Analog Monitor Card, set the monitor items and gain with the follow-
ing constants.
User
Change
during
Setting Factory
Valid Access Levels
User
Constant
Number
Name
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
Open Loop
Vector
Flux Vector
F4-01
Channel 1 monitor
selection
1 to 38 -- 2 B B
F4-02
Channel 1 gain 0.00 to 2.50
Mul-
tiple
1.00
B B
F4-03
Channel 2 monitor
selection
1 to 38 -- 3 B B
F4-04 Channel 2 gain 0.00 to 2.50
Mul-
tiple
0.50 B B
F4--05
Channel 1 output bias
--10.0 to
+10.0
% 0.0
B B
F4--06 Channel 2 output bias
--10.0 to
+10.0
% 0.0 B B
F4--02
(F4--04)
A O
+
+
F4--05
(F4--06)
Output gain
Output bias
Fig
7.16
Analog Output Block Diagram
7