YASKAWA CC-Link SI-C3, Руководство по установке

Страница: 35 / 139

6 Related Drive Parameters
YASKAWA TOEP C730600 83A CC-Link Installation Manual 35
No.
(Hex.)
Name Description
Default
(Range)
the master device to control the frequency reference of the
drive.
b1-18
(0179)
Voltage
Reference Source
(For D1000)
Selects the voltage reference input source.
0 : Keypad - RUN and STOP keys
1 : Analog Input
2 : Memobus/Modbus Communications
3 : Option
7 : Input Voltage Based Control 1
8 : Input Voltage Based Control 2
Note:
• On D1000, to use the CC-Link master device as the
voltage reference, set
b1-18 = 3 .
8
(0 - 3, 7, 8)
F6-01
(03A2)
Communication
Error Selection
(For Drive)
Selects drive response when the drive detects a bUS [Option
Communication Error] error during communications with the
option.
0 : Ramp to Stop
1 : Coast to Stop
2 : Fast Stop (Use C1-09)
3 : Alarm Only
4 : Alarm - Run at d1-04
5 : Alarm - Ramp Stop
Note:
• When you set this parameter to 3 or 4 , the drive will
continue operation after it detects a fault. Separately
prepare safety protection equipment and systems, for
example fast stop switches.
• Refer to the drive manual to know if settings 4 and 5 are
available. Settings 4 and 5 are available in A1000
software versions PRG: 1021 and later.
•
The setting range for 1000-Series drives is different for
different software versions. Refer to the instruction
manual of your specific drive for more information.
1
(0 - 5)
F6-01
(03A2)
Communication
Error Selection
(For D1000)
Selects drive response when the drive detects a bUS [Option
Communication Error] error during communications with the
option.
1 : Coast to Stop
3 : Alarm Only
1
(1, 3)
F6-02
(03A3)
Comm External
Fault (EF0)
Detect
(For Drive,
D1000)
Selects the conditions at which EF0 [Option Card External
Fault] is detected.
0 : Always Detected
1 : Detected during RUN Only
0
(0, 1)