Bluetooth USB Dongle User Manual
7
3.3 Driver Installation
3.3.1 After installing the software and inserting the Bluetooth USB Dongle into an
available USB port, you should see your system discovers a new USB
Bluetooth device. Click on
Next
. (Note: In some operating systems, the
hardware installation will be automatic, and installation steps 3.3.2 o 3.3.4
will not be necessary.)
3.3.2 Choose
Install the software automatically (recommended.)
Click on
Next
.
3.3.3 Select
Specify a location
and click on
Next
for the location of the USB
Dongle driver.
3.3.4 Confirm that the driver was found. Clink on
Next
.
3.3.5 Confirm the completion of the driver installation. Click on
Finish
.
3.4 Bluetooth Configuration
3.4.1 To initial Bluetooth, right-click the Bluetooth icon located on lower-right
corner of the screen, and choose
Start Using Bluetooth
; or double-click
the Bluetooth icon.
3.4.2 A
Initial Bluetooth Configuration Wizard
window appears. Click on
Next
.
3.4.3 Fill in your computer name and computer type (Desktop or Laptop), and
click on
Next
.
3.4.4 To configure the Bluetooth services your computer will make available for
other Bluetooth devices, click on
Next
to configure or
Skip
not to change
the configuration and to step 3.4.6.
3.4.5 Choose the services that your computer will offer, and then click on
Next
.
3.4.6 Click
on
Next
to configure the way your computer will use the service of
other remote Bluetooth devices; or
Skip
the configuration and click on
Finish
to complete the basic Bluetooth configuration.
3.4.7 Select a device and click on
Next
.
3.4.8 To initial pairing, enter PIN Code and then click on
Initial Pairing
.
3.4.9 Select the services you are interested in and click on
Next
to repeat step
3.4.6.
