Bluetooth USB Dongle User Manual
25
7.7 Network Access
The Network Access service permits your computer to access the LAN (Local Area
Network) service through a remote Bluetooth device. Only point-to-point
connection is supported. Your computer cannot be both a Bluetooth Network
Access server and a Bluetooth Network Access client at the same time.
7.7.1 Setup for Windows 98SE & ME (Network Access Server)
Make sure if the Internet routing software such as WinRoute Lite has been
installed. If not, you can get a downloadable version of WinRoute software
from
www.kerio.com
From the Control Panel, double-click the
Network
icon.
On the
Configuration
tab, select
TCP/IP\Bluetooth LAN Access Server
Driver
.
Click on
Properties
, and choose the
IP Address
tab.
Choose
Specify an IP address
Enter an IP address (suggested value is 192.168.1.1.)
Enter a Subnet address (suggested value is 255.255.255.0)
Click
OK
twice to close the dialog boxes.
Click
YES
in the System Setting Change dialog box to restart your computer.
7.7.2 Setup for Windows 2000 & XP (Network Access Server)
From the Windows system tray, right-click the Bluetooth icon.
Choose
Advanced Configuration
, the
Local Services
tab,
Network
Access
, and click on
Properties
.
Select
Allow other devices to access the Internet/LAN via this
computer
from the drop-down menu of Select the type of service to offer
remote devices, and then click on
Configure Connection Sharing
.
Right-click
Local Area Connection
from the Control Panel\Network and
Dial-up Connections, and select
Properties
and then the
Advanced
tab.
Enable
Internet Connection Sharing
to allow other network users to
connect to through this computer’s Internet connection, click on
OK
.
Click
YES
in the confirmation dialog box.
7.7.3 Setup for Network Access Client
From the Windows system tray, right-click the Bluetooth icon.
Choose
Advanced Configuration
, the
Local Services
tab,
Network
Access
, and click on
Properties
.
Select
Allow other devices to create a privacy network with this
computer
from the drop-down menu of Select the type of service to offer
remote devices. Click on
OK
.
