OPERATION
16
1741078
The operation of any snow blower can result in foreign objects being thrown into the eyes,which can
result in severe eye damage. Always wear safety glasses or eye shields before beginning snow blower
Operation. We recommend standard safety glasses or Wide Vision Safety Mask for over spectacles.
SNOW BLOWER OPERATION
The most effective use of the snow blower will be established
by experience, taking into consideration the terrain, wind
conditions and building location which will determine the
direction of the discharge chute.
NOTE: Do not blow snow towards a building as hidden
objects could be blown with sufficient force to cause
damage.
TO STOP YOUR SNOW THROWER
1. To stop throwing snow, release the
auger drive lever
.
See Figure 14.
2. To stop the wheels, release the
traction drive lever
.
3. To stop the engine, push the
throttle control lever
to off
and pull out the
ignition key
.
TO CONTROL SNOW DISCHARGE
1. Move the
electric chute switch
to set the direction (left
to right) of the snow throwing.
2. Push the
remote chute lever
forward to discharge the
snow high and far. Pull the
remote chute lever
back to
discharge the snow down.
HOW TO MOVE FORWARD AND BACKWARD
1. To move the snow thrower forward, engage the
traction
drive lever
(
left hand
). As the snow thrower starts to
move forward, push the
shift lever
to the desired speed.
Maintain a firm hold on the handles and guide the snow
thrower along the clearing path. Do not attempt to push
the snow thrower.
2. To move the snow thrower backward, pull the
shift lever
to the reverse position.
TO THROW SNOW
1. Push down the auger driver lever (
right hand
). See
Figure 14.
2. Release to stop throwing snow.
NOTE: When clearing wet, heavy snow, it is
recommended that the ground speed of the unit be
reduced, maintain full throttle and do not attempt to clear
the full width of the unit.
For additional operating instructions see “Operating Tips” in this
section of the manual.
IMPORTANT: Be sure front of unit is clear of bystanders
or obstacles before operating.
WARNING: Read Owner’s Manual before oper-
ating machine. This machine can be dangerous
if used carelessly.
Never operate the snow blower without all guards, cov-
ers, and shields in place.
Never direct discharge towards windows or allow by-
standers near machine while engine is running.
Stop the engine whenever leaving the operating posi-
tion.
Disconnect spark plug before unclogging the impeller
housing or the discharge chute and before making re-
pairs or adjustments.
When leaving the machine, remove the ignition key.
To reduce the risk of fire, keep the machine clean and
free from spilled gas, oil and debris.
Auger Drive Lever
Traction Drive Lever
Shift Lever
Remote Chute Lever
Electric Chute
Switch
Figure
15
Содержание 6331790-43 Series
Страница 37: ...NOTES 37 1741078...
Страница 38: ...NOTES 38 1741078...
