Yanmar 400001 Скачать руководство пользователя

Страница: 90 / 170

10-9

10. 3-POINT HITCH AND DRAWBAR

SA221/324/424 Operation Manual

■

Hitch Hole (SA221)

(A) Hitch hole

Avoid injury!

●

Always use the hitch hole to attach a trailer or
towed implement.

●

Attempting to attach a trailer or towed
implement at the top link or rear axle can
cause the tractor to tip over.

●

Only use the hitch hole that is provided with
the tractor.
• avoid installing or using a floating type or

any other type of the hitch

●

Always hitch loads being towed to the hitch.
• the preceding action prevents the tractor

from tipping over rearward

●

The hitch hole should only be used for towing
light loads. (Maximum towing load: 1102 lb.
(500 kg).

●

For maximum allowable weight to be towed,
see “Chapter 4. IMPLEMENT CAPACITIES”.

●

If you cannot back up a slope with a towed
load, the slope is too steep to operate on with
the towed load. Reduce the towed load or do
not operate.

●

Do not turn sharply. Use additional caution
when turning or operating under adverse
surface conditions. Use care when reversing.

! WARNING

(A)

3. Drawbar (SA324/424)

Avoid injury!

●

Always use the drawbar to attach a trailer or
towed implement.

●

Attempting to attach a trailer or towed
implement at the top link or rear axle can
cause the tractor to tip over.

●

Only use the drawbar that is provided with
the tractor.

• avoid installing or using a floating type or

any other type of the drawbar

●

Always hitch loads being towed to the
drawbar.

• the preceding action prevents the tractor

from tipping over rearward

●

Avoid attaching a longer drawbar.

• the preceding action can damage the

attached section

• the same action can cause the implement to

become disconnected

• If you cannot back up a slope with a towed

load, the slope is too steep to operate on
with the towed load. Reduce the towed load
or do not operate.

• Do not turn sharply. Use additional caution

when turning or operating under adverse
surface conditions. Use care when
reversing.

NOTE

●

The tractor comes equipped with a stationary
drawbar.

●

Always remove the drawbar before attaching any
3-point hitch implement.

! WARNING

10_3pointHitch.fm 9 ページ２０１８年７月６日　金曜日　午前９時４７分

Содержание 400001











































































































































































Результаты поиска

Содержание 400001

Отзывы:

Похожие инструкции для 400001

Бренды по названию

Популярные бренды

Yanmar 400001, Руководство по эксплуатации

Результаты поиска

Содержание 400001

Отзывы:

Похожие инструкции для 400001

Бренды по названию

Популярные бренды