Yanmar 400001 Скачать руководство пользователя

Страница: 63 / 170

8-8

8. OPERATE THE TRACTOR

SA221/324/424 Operation Manual

2. Pull the parking brake lock holder forward to

release it then parking brake lock lever downward
to unlock the brake pedal.

(A) Parking brake lock lever
(B) Parking brake lock holder

(a) Pull forward: Parking brake lock holder is

released as indicated by arrow. Refer to figure.

(b) Downward: Unlock the brake pedal.

3. Release the brake pedal. Make sure that the

brake pedal is unlocked.

9. Depress slowly the forward and

reverse drive pedal

(A) Forward drive pedal
(B) Reverse drive pedal

■

Stop Procedure

1. Push down the Power Take Off (PTO) switch to

OFF position.

2. Slow down the engine.
3. Make sure that the forward and reverse drive

pedal is released completely.

4. Depress the brake pedal to stop the tractor.
5. Move the range shift lever to the N (neutral)

position. (SA324/424)

6. Push the 3-point hitch control lever forward to

lower any implements to the ground.

7. Engage the parking brake securely, for details,

see "6. Lock and Set the Parking Brake" on page
7-3.

8. Turn the starter key switch to OFF position.

IMPORTANT

●

When the forward and reverse drive pedal is
released, the transmission will automatically
return to the N (neutral) position.

(A)

(B)

(b)

(a)

(A)

(B)

4. Stop the Tractor

Avoid injury!

●

Slow down before making a turn.

●

To prevent injury or property damage:
• always lock the parking brake when the

range shift lever is in the N (neutral) position

• whether the engine is running or stopped
• the tractor's wheels are free to move when

the range shift lever is in the N (neutral)
position

! WARNING

SA221_324_424_OperatorsManual.book 8 ページ２０１８年６月４日　月曜日　午後５時１９分

Содержание 400001











































































































































































Результаты поиска

Содержание 400001

Отзывы:

Похожие инструкции для 400001

Бренды по названию

Популярные бренды

Yanmar 400001, Руководство по эксплуатации

Результаты поиска

Содержание 400001

Отзывы:

Похожие инструкции для 400001

Бренды по названию

Популярные бренды