Yanmar 400001 Скачать руководство пользователя

Страница: 76 / 170

SA221/324/424 Operation Manual

9. Push down on the center of the seat while pulling

down on the lock release lever.

(A) Lock release lever of swivel seat bracket
(B) Swivel seat bracket

(a) Upward: Unlock the swivel seat bracket
(b) Downward: Lock the swivel seat bracket
(c) Push down on the center of the seat.

6. Differential Lock Pedal for SA324/424

(Option for SA221)

When rear wheels begin to slip:
Engage the differential lock to gain greater traction.

<Engage the differential lock>
1. Stop the tractor.
2. Drive the tractor at a very slow speed.
3. Depress the differential lock pedal.

(A) Differential lock pedal

(a) Disengage position
(b) Engage position

<Disengage the differential lock>
1. Release the differential lock pedal completely.

●

To prevent tipping of the tractor:
• do not attempt to turn with the differential

lock engaged

• do not engage the differential lock while the

tractor is traveling at a high speed

IMPORTANT

●

If differential lock does not disengage after
removing foot from the differential lock pedal:
• Change turning direction side to side while

driving slowly.
Travel direction can also be changed between
forward and reverse to make differential lock
disengage.
These actions equalize the traction force on the
differential.

• Then release the differential lock pedal.

●

To prevent damage to the differential gears,
Never use the differential lock while traveling at
high speed.

●

The differential lock is designed to be used for
short durations.

●

Prolonged use can damage the differential gears.

(a)

(A)

(b)

(B)

(c)

! WARNING

NOTE

●

Engaging the differential lock:
• locks the right and left rear axles.
• the right and left rear axles simultaneously

rotate at the same speed.

• the preceding action allows the tractor to

develop maximum traction force.

IMPORTANT

●

Always decrease the travel speed when using the
differential lock.

110697-00X00

SA221_324_424_OperatorsManual.book 21 ページ２０１８年６月４日　月曜日　午後５時１９分

Содержание 400001











































































































































































Результаты поиска

Содержание 400001

Отзывы:

Похожие инструкции для 400001

Бренды по названию

Популярные бренды

Yanmar 400001, Руководство по эксплуатации

Результаты поиска

Содержание 400001

Отзывы:

Похожие инструкции для 400001

Бренды по названию

Популярные бренды