Yanmar 400001 Скачать руководство пользователя

Страница: 114 / 170

14. PERIODIC SERVICE

14-2

SA221/324/424 Operation Manual

■

Open the Hood

1. Park the tractor safely and securely.

• For details, see "7. Safe Practices for Parking the

Tractor" on page 1-7.

2. Push the hood release lever rightward to unlatch

the hood lock.

(A) Hood release lever

3. Lift up the hood with both hands.

• The hood support is automatically set when the

hood is fully raised.

(A) Hood support

●

Read the DANGER, WARNING and CAUTION
statements on the safety alert decals on the
tractor.

●

Before starting the engine:
• remain seated on the operator seat
• move the range shift lever to the N (neutral)

position

• push down Power Take Off (PTO) switch to

OFF position

• never attempt to start the engine while the

operator is still on the ground

●

Engine exhaust gas contains carbon
monoxide.
• if inhaled, the engine exhaust gas can cause

severe poisoning or even death

●

Always perform the safety checks in a well
ventilated area.

●

When working in an enclosed area, always
expel the engine exhaust gas to an outdoor
area.
• connect one end of an extension pipe to the

engine exhaust pipe

• set the other end outside of the work area

●

Allow fresh outside air to flow into an
enclosed work area to remove the engine
exhaust gas from the area.

! WARNING

NEVER inhale the engine

exhaust gas.

1. Open/Close the Hood

Avoid injury!

●

Avoid opening the hood while the engine is
running.

●

Avoid touching any hot components, e.g., the
muffler and the exhaust pipe.

! WARNING

(A)

SA221_324_424_OperatorsManual.book 2 ページ２０１８年６月４日　月曜日　午後５時１９分

Содержание 400001











































































































































































Результаты поиска

Содержание 400001

Отзывы:

Похожие инструкции для 400001

Бренды по названию

Популярные бренды

Yanmar 400001, Руководство по эксплуатации

Результаты поиска

Содержание 400001

Отзывы:

Похожие инструкции для 400001

Бренды по названию

Популярные бренды