Yanmar 400001 Скачать руководство пользователя

Страница: 52 / 170

7-5

7. OPERATE THE ENGINE

SA221/324/424 Operation Manual

4. Use the implement control lever to lower the

implements to the ground and lock to the N
(neutral) position.

(A) Implement control lever
(B) Implement control lever lock

(a) Lower the implement to the ground

5. Push the throttle control lever forward from the

slow idle position to the 1/3 to 1/2 fast positions.

(A) Throttle control lever

(a) Push the throttle control lever forward, to increase

the engine speed.

(b) Pull the throttle control lever backward, to

decrease the engine speed.

8. Insert the Key into the Starter Key

Switch and Turn the Key to the ON
Position

OFF position:

The engine does not run.

ON position:

The engine oil pressure warning light and the
alternator/battery charging light illuminates.

START position:

●

The starter turns the flywheel to run the engine.

●

The engine begins to run.

●

Once the engine is running, release the starter key
switch.

(A) OFF position
(B) ON position
(C) START position

9. Check the Lights on the Instrument

Panel

After the starter key switch is turned to the ON
position:

●

The engine oil pressure warning light illuminates.

●

The alternator/battery charging light illuminates.

(A) Engine oil pressure warning light
(B) Alternator/Battery charging light

(A)

(a)

(B)

(A)

(b)

(a)

NOTE

●

The engine oil pressure light turns OFF within 5
seconds after the engine has started.

●

The alternator/battery charging light turns OFF
within 10 seconds after the engine is started.

(A) (B)

(C)

(A)

(B)

SA221_324_424_OperatorsManual.book 5 ページ２０１８年６月４日　月曜日　午後５時１９分

Содержание 400001











































































































































































Результаты поиска

Содержание 400001

Отзывы:

Похожие инструкции для 400001

Бренды по названию

Популярные бренды

Yanmar 400001, Руководство по эксплуатации

Результаты поиска

Содержание 400001

Отзывы:

Похожие инструкции для 400001

Бренды по названию

Популярные бренды