Yamato WG270 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 71

Yamato WG270 Скачать руководство пользователя страница 53

４９

7.

Long storage and disposal

When not using this unit for long term



If this unit is to be put out of service for a long time, be sure to turn of the earth leakage

breaker of this unit for safety, and close the tap. Water in the boiler and distilled water
tank, if stored as it is, will deteriorate in quality due to generated bacteria or algae. Drain
water by the procedure below:

Boiler Water Drain

1. In draining boiler water, turn off the earth

leakage breaker, ensure that the tap is
closed, then wait for 30 minutes or more,
and open the front door.

2. Open the boiler water drain cock.

3. Make sure that all water in the boiler and

float cylinder is drained.

4. Be sure to close the boiler water drain cock.

If boiler water drain cock is opened in next
use, water is not fed into the boiler, and
distillation is not started.

When the distilled water has been left stored in the tank for two weeks or more, drain the
tank content completely and start operation. Start using the distilled water when the water
is ready for sampling and when the specific resistance becomes 1.2MΩ

・

cm or more and

after operation for one hour or more.

Close

Boiler Water
Drain Cock

Open

«
...
51
52
53
54
55
...
»

Содержание WG270








































































Отзывы:

Нет отзывов