Yamato WG270 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 71

Yamato WG270 Скачать руководство пользователя страница 40

３６

6.

Maintenance Method

Inspection and Maintenance

Timing of maintenance and inspection
(Perform daily inspection for stable use of product.)

Maintenance/check

items

Reference for timing

Remarks

Replacement of
pre-treatment cartridge

Approx. 6 months

Exchange message appears

on the indication area.

Throughput: About 5000 liters of city water in
Tokyo.
If the quality of raw water is not good, perform
this maintenance as soon as possible.

Replacement of
membrane filter

Approx. 3 months

Exchange message appears

on the indication area.

Throughput: approx. 1500 liters for pure
water.
Need to exchange if the amount of collection
is less than the above value.

Replacement of ion
exchange resin cartridge
CPH-N

Exchange message appears

on the indication area.

(Displayed when the

conductivity of pure water is

more than 1 x 10

-4

S/m.)

Throughput: About 600 liters with the raw
water of 200 x 10

-4

S/m.

Replacement of ion
exchange resin cartridge
CPC-H

Exchange message appears

on the indication area.

(Displayed when the

conductivity of pure water is

more than 0.2 x 10

-4

S/m.)

Throughput

：

about 600 liters with the raw

water of 200 x 10

-4

S/m

By replacing CPC-N, the CPC-H service life
can be extended substantially.

。

Replacement of
deaeration membrane
module

About one year

Exchange message appears in

the indication area.

Throughput

：

Maintains the specific resistance

of distilled water to1.0 MΩ

・

cm or more

Replacement of TOC
reduction UV lamp

About 4000 hours

Exchange message appears in

the indication area.

Throughput

：

TOC of the distilled water stored

in the tank may be maintained at 50 ppb or
less (equivalent to A4 water of JIS) for about
week.
If the tank has been left unused for a long
period of time, drain first, and store the
distilled water again before use.

Cleaning of distiller

3 months

If the quality of raw water is not good, perform
cleaning early.

Cleaning of water supply
hose filer

6 months

Replacement of hose

2 years

Connections shall be checked monthly.

Drainage of distilled
water tank

3 months

If not used for a long time, drain water from
the tank.

Inspection of the vacuum
pump

One year

Change the consumable parts.

Replacement of pre-treatment cartridge

See Page 12

“Secure the pre-treatment cartridge securely " for replacement procedure.

When the cartridge is put to use without replacement, life span of ion exchange resin cartridge
becomes short.

Please dispose used cartridge as noncombustible. When it is sent back to our company, fill in the
designated invoice attached to a new cartridge, and send it with the used cartridge to us.

«
...
38
39
40
41
42
...
»

Содержание WG270








































































Отзывы:

Нет отзывов