Yamato WG270 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 71

Yamato WG270 Скачать руководство пользователя страница 18

１４

2. Before Using this unit

Requirements for Installation

WARNING!

23.

Essential Points for Initial Use



In the case of WG270, the quality of distilled water stored in the distilled water tank may be

worse than the A4 level quality temporarily because of contact with the atmospheric air.
WG270 is equipped with the function to recover the water quality of such pure water to the
A4 level by means of circulation under ultraviolet ray irradiation and removal of CO2 gas.



It may take hours for the distilled water stored in the tank after initial start of WG270 to reach

the A4 level water quality. Carry out cleaning of the tank inside as follows:

(1) Install and start operation of WG270 system. Keep operation till the tank is filled with

the distilled water.

(2)  Discharge the distilled water totally from the outlet of distilled water tank.
(3)  Start operation again and keep operation till the tank is filled with the distilled water.
(4)  When the tank is full of the distilled water, continue operation without turning OFF power

supply (keep the distilled water circulating). In four or more hours, use the distilled
water. (This step is necessary for initial operation only).



A guideline is as follows. If the specific resistance of distilled water is maintained at 1.2

Ｍ

Ω

・

cm or more for one hour or more continuously, the distilled water with the A4 level or

higher water quality can always be sampled.

If the specific resistance of distilled water is less than 1.2MΩ

・

cm, continue operation

(keep the distilled water circulating) for approximately four hours or more before sampling
the distilled water.



When the distilled water has been stored for two weeks or more in the tank, drain the water

totally and start operation. Take steps (3) and (4) above before using the distilled water.

24. After installation

This unit may be turned over under unexpected earthquake or impact. Provide adequate

measures against such turn-over to ensure the safety.

«
...
16
17
18
19
20
...
»

Содержание WG270








































































Отзывы:

Нет отзывов