Yamato WG270 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 71

Yamato WG270 Скачать руководство пользователя страница 39

３５

5. Handling Precautions

WARNING!

1. If a problem occurs



If smoke or strange odor should come out of this unit for some reason, turn off the power

key right away, and then turn off the circuit breaker and the main power. Immediately
contact dealers or Yamato Scientific Co., Ltd. sales office for inspection. If this procedure is
not followed, fire or electrical shock may result. Never perform repair work yourself, since it
is dangerous and not recommended.

2. During a thunder storm



During a thunderstorm, turn off

the power key immediately, then turn off the circuit breaker

and the main power.



If this procedure is not followed, fire or electrical shock may be caused.

3. Take enough care in handling detergent (liquid)



In storing detergent (liquid), store in enclosable container avoiding high temperature and

humidity.



Principal component of detergent (liquid) Orgazor 10 is sulfamic acid (acidic with pH of

water solution approx. 1).



In handling this detergent (liquid), use protective tools (gloves, mask, and glasses).



When it is in contact with human body, wash it away with clean water.



Neutralize the liquid with neutralizer (such as sodium hydroxide) after washing.



Ensure neutralization with pH test paper, etc.



Do not use empty container for beverage.



Do not allow detergent to directly flow into agricultural irrigation canal or fields because it

causes withering of rice crop.

4. Do not step on this unit



Do not step on this unit. It will cause injury if this unit fall down or break.

5. Do not put anything on this unit



Do not put anything on this unit. It will cause injury if fall.

6. In power failure (Factory setting :no power failure recovery function)

When system has halted during operation due to power failure etc. and is provided with power again,
system is brought to standby status. When restarting operation, start from (Page 24 "1. Turning on
power ").

7.Do not look directly into the TOC reduction UV lamp while this lamp is ON.

While the TOC reduction system is operating, the TOC reduction UV lamp may go ON if the specific
resistance of the distilled water in the tank increases to 1.05

ＭΩ・

cm or more. Never look directly

into the UV lamp when opening the front door of this instrument.
When replacing consumables, turn OFF the circuit breaker beforehand.

«
...
37
38
39
40
41
...
»

Содержание WG270








































































Отзывы:

Нет отзывов