Yamato WG270 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 71

Yamato WG270 Скачать руководство пользователя страница 10

６

2. Before Using this unit

Requirements for Installation

WARNING!

5. Installation on horizontal surface



Set this unit to the flattest place. Setting this unit on rough or slope place could cause the

unexpectible trouble or malfunction.
The unit WG270 weighs 55kg gross. Two or more persons are required for carrying or
setting these units.

6. Choose a correct power distribution board or receptacle



Use a plug socket conforming to electric capacity (capacity 15A or greater).



When power capacity is insufficient, sampling of distilled water goes short, and normal

control is disabled by fall of power voltage. Connect to power equipment having sufficient
power capacity.

Electric capacity

：

WG270 AC220V Single phase 7A

7. Connection of power cord



Always ensure that breaker on power unit side is "Off" before connecting power cord.

Power plug of WG270 uses 3-core cord including grounding wire, and the plug is grounded
type. If your plug socket is not compatible (2P), use a ground adapter attached in
nonstandard. In using ground adapter, be sure to ground a grounding lead.

8. Handling of power code



Do not entangle the power cord. This will cause overheating and possibly a fire.



Do not bend or twist the power cord, or apply excessive tension to it. This may cause a fire

and electrical shock.



Do not lay the power cord under a desk or chair, and do not allow it to be pinched in order to

prevent it from being damaged and to avoid a fire or electrical shock.



Keep the power cord away from any heating equipment such as a room heater. The cord's

insulation may melt and cause a fire or electrical shock.



If the power cord becomes damaged (wiring exposed, breakage, etc.), immediately turn off

the power at the rear of this unit and shut off the main supply power. Then contact your
nearest dealer for replacement of the power cord. Leaving it may cause a fire or electrical
shock.



Connect the power plug to the receptacle which is supplied appropriate power and voltage.

«
...
8
9
10
11
12
...
»

Содержание WG270








































































Отзывы:

Нет отзывов