![background image](http://html.mh-extra.com/html/yamato/body-planner-df870/body-planner-df870_operation-manual_905308034.webp)
Chapter 5 Connection to external devices
33
DF870 communication software
You can display measured results on a PC screen. First, set the serial port number and its speed. For
the serial port, select the COM port assigned on the PC. Select the communication speed specified in
the user parameter (Bluetooth™
is fixed at 9600 bps). Clicking
Connect
in the upper right of this
screen at this point indicates
as the connection status sign on the DF870’s screen, where
you can send measured results to the PC (Click
Disconnect
to sever the connection). The values on
the PC screen are updated each measurement. Click
Clear
to erase all the measured results.
Settings output file
You can send the setting values to the DF870. While DF870 communication software is opened, input
data in Row 1—i.e. a sex (male: 1, female: 0) in Column A, an age in Column B, a height in Column C,
a waist size in Column D, and the tare for clothes in Column E. Then Save and close the file. When
you measure a weight in Body Composition mode of the DF870 at this point, the system sends the
input values to the DF870 to immediately start measurement. Note that, if the tare for clothes set in the
DF870 is different from the tare for clothes input in the settings output file, the system uses the value
input in the settings output file as the tare for clothes. Also note that if the tare for clothes input in the
settings output file is zero or none, the system cancels the tare for clothes set in the DF870.
↓
Sex
↓
Age
↓
Height
↓
Waist
↓
Tare for clothes
(Male: 1, female: 0)
Select a serial port.
Select a
communication
speed.
Connect to the PC.
Clear the data.
Содержание Body Planner DF870
Страница 10: ...Chapter 1 Read these instructions before use 9 ...
Страница 15: ...Chapter 2 Preparations before use 14 ...
Страница 46: ...Chapter 9 Specifications 45 9 1 Outside drawing ...