Yamato Body Planner DF870 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 47

Yamato Body Planner DF870 Скачать руководство пользователя страница 6

Chapter 1 Read these instructions before use

5

Caution

: Do not lean against the DF870.

Otherwise, the DF870 may tip over, leading to injuries or machine failure.

: Do not place your finger(s) into a gap, a hole, or any other pinching points on the

platform. Do not forcibly pull any cords (especially the power plug).

Otherwise, you may get injured or machine failure may occur.

: Do not drop any metal pieces into the printer or a gap. Do not spill any liquids such

as water over the DF870.

Otherwise, a fire, electric shock, or machine failure may occur.

: Do not use the DF870 in any areas other than those specified in the nameplate.

Otherwise, a measurement error occurs on the DF870.

: Never use the DF870 in an extremely humid place.

Otherwise, a fire, electric shock, or machine failure may occur.

: Do not use magnetic therapy equipment or microwave therapy equipment near the

DF870.

Otherwise, the DF870 may malfunction, leading to incorrect measurement.

: Never touch the thermal head section immediately after printing.

The section can be very hot immediately after printing. You may burn yourself if you touch it.

: Do not drop the DF870. Do not place it on its side during storage.

Otherwise, machine failure may occur.

: To prevent damage to the DF870

(1) Do not push the display panel or operation keys with your fingernail or other pointed

objects.

(2)  Observe the specified input voltage and operating conditions.
(3)  Do not place anything heavier than the weighing capacity on the weighing platform.
(4)  Do not apply any excessive impact or vibration to the platform, for example by dropping

an item on it.

: To maintain the performance of the DF870

(1) Do not place the DF870 in a place close to any equipment that generates vibrations.

(2) Do not place the DF870 in a place exposed to direct sunlight or air-blow from an air

conditioner.

(3)  Place the DF870 on a rigid floor or table.
(4)  Do not use the DF870 outside the range of the operating temperatures (5–35°C).
(5)  Use the DF870 in a horizontal position.

(When the DF870 is not horizontal, ensure to make it level through adjustments with the
leveling legs and the auxiliary leg.)

«
...
4
5
6
7
8
...
»

Содержание Body Planner DF870
















































Отзывы:

Нет отзывов