5 - 44
CHAS
HANDLEBAR
7. Install:
●
Engine stop switch
1
●
Clutch lever holder
2
●
Bolt (clutch lever holder)
3
●
Decompression lever holder
4
●
Bolt (decompression lever holder)
5
●
Clamp
6
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
NOTE:
●
The engine stop switch, clutch lever holder,
decompression lever holder and clamp
should be installed according to the dimen-
sions shown.
●
Pass the engine stop switch lead in the mid-
dle of the clutch holder.
8. Install:
●
Clutch cable
1
●
Decompression cable
2
NOTE:
Apply the lithium soap base grease on the
clutch cable end and decompression cable
end.
9. Adjust:
●
Clutch lever free play
Refer to “CLUTCH ADJUSTMENT”
section in the CHAPTER 3.
●
Decompression lever free play
Refer to “DECOMPRESSION LEVER
ADJUSTMENT” section in the CHAP-
TER 3.
B
2
1
10. Clamp the clamp portion
a
of the num-
ber plate to the handlebar.
11. Insert the end of the fuel tank breather
hose
1
into the hole of the number plate.
