
FI
FUEL INJECTION SYSTEM
6-13
Diagnostic
code No.
Item
FI diagnostic tool display
Checking method
D07
Vehicle speed
pulse
0 ~ 999
Check that the number increases when
the front wheel is rotated. The number is
cumulative and does not reset each tim e
the wheel is stopped.
D08
Lean angle sensor
• Upright
• Overturned
0.4 ~1.4
3.8 ~ 4.2
Remove the lean angle sensor and
incline it m ore than 45 degrees.
D09
Fuel system
voltage (battery
voltage).
Approximately 12.0
Compare with the actually measured
battery voltage.
(If the battery voltage is lower, perform
recharging.)
D11
Engine
temperature.
Displays the engine
temperature.
Check the engine temperature.
Compare with the values displayed on FI
diagnostic tool.
D30
Ignition coil
Actuates the ignition coil five
times at one-second intervals.
Illum inates the “WARNING” on
the FI diagnostic tool and engine
trouble warning light.
Check the spark five times
• Connect an ignition checker.
D36
Fuel injector
Actuates the fuel injector five
times at one-second intervals.
Illum inates the “WARNING” on
the FI diagnostic tool and engine
trouble warning light.
Check the operating sound of the
injector five times.
D52
Headlight relay
Actuates the headlight relay five
times at one-second intervals.
(ON 2 seconds, OFF 3 seconds)
Illum inates the “WARNING” on
the FI diagnostic tool and engine
trouble warning light.
Check the operating sound of the
headlight relay five times.
D54
FID (fast idle
solenoid)
Actuates the FID five times at
one second intervals.
Illum inate the “W ARNING” on
the FI diagnostic tool.
Check the operating sound of the FID
five times.
D60
EEPROM fault
code display
• No history
• History exists
00
01
01: CO adjustment value is
detected.
—
D61
Malfunction history
code display
• No history
• History exists
00
Fault codes 12-50
• (If more than one code number
is detected, the display
alternates every two seconds to
show all the detected code
numbers are shown, the display
repeats the same process.)
—
D62
Malfunction history
code erasure
• No history
• History exists
0
Up to 18 fault codes
—
To erase the history, press the “MODE”
button of the FI diagnostic tool.
D70
Control number
0 ~ 254
—
Содержание YBR250 2007
Страница 1: ...YBR250 SERVICE MANUAL 5D1 F8197 E0 2007 ...
Страница 2: ......
Страница 359: ...YAMAHA MOTOR DA AMAZÔNIA LTDA ...