Yamaha TT-R90, Руководство по эксплуатации для владельца, Страница: 282 / 390

4 - 44
ENG
CDI MAGNETO AND STARTER CLUTCH (TT-R90E)
3. Install:
• Spring
1
• Spring cap
2
• Pin
3
4. Install:
• Shim
1
• Starter wheel gear
2
• Starter idle gear
3
• Shaft
4
NOTE:
• Apply the molybdenum disulfide oil on the
starter wheel gear inner circumference.
• Apply the engine oil on the starter idle gear
inner circumference and on the shaft outer
circumference.
1 2 3
1
2
3
5. Install:
• Woodruff key
1
• Rotor
2
NOTE:
• Clean the tapered portion of the crankshaft
and the magneto hub.
• When installing the magneto rotor, make
sure the woodruff key is properly seated in
the key way of the crankshaft.
6. Tighten:
• Nut (magneto)
1
NOTE:
Tighten the nut (magneto)
1
while holding the
magneto
2
with a sheave holder
3
.
7. Install:
• Crankcase cover (left)
NOTE:
• Pass the starter motor lead
1
and neutral
switch lead
2
into the crankcase cover
groove as shown.
• Fasten the starter motor lead with the clamp
3
.
Sheave holder:
YS-1880-A/90890-01701
T
R
.
.
48 Nm (4.8 m · kg, 35 ft · lb)
2
1
1
3