Yamaha TT-R125(N) 2000, Руководство по эксплуатации для владельца

Страница: 144 / 508

2 - 26
SPEC
CABLE ROUTING DIAGRAM
1 Air vent hose
2 Spark plug lead
3 Starter cable
4 Throttle cable
5 Clutch cable
6 Clamp
7 Cable guide
8 Engine oil breather hose
9 Overflow hose
Å
After clamping the starter cable, push it against the starter plunger.
ı
Put the tip of the air vent hose into the main pipe.
Ç
Install the primary coil terminal (orange) to the ignition coil.
Î
Fasten the ground lead together with the ignition coil.
‰
Pass the clutch cable on the inside of the throttle and starter cable.
Ï
Clamp the clutch cable with the paint in the cable guide bottom recess.
Ì
Pass the throttle cable and starter cable into the cable guide.
Ó
Pass the engine oil breather hose and overflow hose between the right
half of the swingarm and pillar tube.
È
Clamp the engine oil breather hose, overflow hose and air vent hose to
2 clicks.