Yamaha TMAX XP530E-A 2017, Руководство по обслуживанию

Страница: 256 / 676

FRONT FORK
4-89
EAS30206
REMOVING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Stand the vehicle on a level surface.
WARNING
EWA13120
Securely support the vehicle so that there is
no danger of it falling over.
TIP
Place the vehicle on a maintenance stand so
that the front wheel is elevated.
2. Loosen:
•
Upper bracket pinch bolt “1”
•
Cap bolt “2”
•
Lower bracket pinch bolts “3”
WARNING
EWA13640
Before loosening the upper and lower brack-
et pinch bolts, support the front fork leg.
3. Remove:
• Front fork leg
EAS30207
DISASSEMBLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
NOTICE
ECA22020
Because the left and right damper rod as-
semblies are different, be sure to install them
in the correct positions.
1. Remove:
•
Cap bolt “1”
• Spacer “2”
•
Damper rod locknut “3”
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Press down on the spacer with the fork spring
compressor “4”.
b. Install the rod holder “5” between the damper
rod locknut “3” and the spacer “2”.
TIP
Use the side of the rod holder that is marked “B”.
c. Hold the cap bolt “1” and loosen the damper
rod locknut “3”.
d. Remove the cap bolt.
e. Remove the rod holder and fork spring com-
pressor.
f. Remove the spacer and damper rod locknut.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Drain:
•
Fork oil
TIP
Stroke the damper rod assembly “1” several
times while draining the fork oil.
2
1
3
Fork spring compressor
90890-01441
Fork spring compressor
YM-01441
Rod holder
90890-01434
Damper rod holder double ended
YM-01434
2
1
5
4
3