Yamaha TMAX XP530E-A 2017, Руководство по обслуживанию

Страница: 484 / 676

FUEL INJECTION SYSTEM
8-93
Fault code No. P0560
Fault code No. P0601, P0606
Fault code No. P0560
Item Charging voltage is abnormal.
Fail-safe system
Able to start engine
Able to drive vehicle
Diagnostic code No. —
Tool display —
Procedure —
Item
Probable cause of malfunc-
tion and check
Maintenance job
Confirmation of service com-
pletion
1 Malfunction in charging system. Check the charging system.
Refer to “CHARGING SYSTEM”
on page 8-19.
Defective rectifier/regulator or
AC magneto

Replace.
Defective connection in the
charging system circuit

Prop-
erly connect or replace the wire
harness.
Start the engine and let it idle for
approximately 5 seconds.
Check the condition of the fault
code using the malfunction
mode of the Yamaha diagnostic
tool.
Condition is “Recovered”

Go
to item 2 and finish the service.
Condition is “Detected”

Repeat item 1.
2 Delete the fault code and check
that the engine trouble warning
light goes off.
Confirm that the fault code has
a condition of “Recovered”
using the Yamaha diagnostic
tool, and then delete the fault
code.
Fault code No. P0601, P0606
Item
Internal malfunction in ECU. (When this malfunction is detected in
the ECU, the fault code number might not appear on the tool dis-
play.)
Fail-safe system
Able/Unable to start engine
Able/Unable to drive vehicle
Diagnostic code No. —
Tool display —
Procedure —
Item
Probable cause of malfunc-
tion and check
Maintenance job
Confirmation of service com-
pletion
1 Malfunction in ECU. Replace the ECU.
Refer to “REPLACING THE
ECU (Engine Control Unit)” on
page 8-230.
Push the ON/start switch.
Check that the engine trouble
warning light does not come on.