Yamaha SY99 Скачать руководство пользователя страница 229

Страница: 229 / 344

SONG MODE

Summary: The second song edit job directory con -

tains various operations which allow you to edit
the data in specified measures of tracks 1-15 in
various ways. To select the track to which the

operation will apply, press a track select button

1-15. Some operations (jobs 10, 12, 13, and 15)

allow you to select two or more tracks. These
edit jobs can be used only on tracks 1-15. Track

16 contains Part data, not sequence data.

Procedure:

From: song play mode

Press: F4 (Job2) (JUMP #606)

Select: the desired song edit job

Move the cursor in this area and press ENTER to

select the specified job.

Pressing F1-F8 will select the corresponding job

1-8. Holding SHIFT and pressing F1-F7 will select

the corresponding job 9-15.

01: Quantiz (Quantize): Adjust the timing of

each event in the specified measures of the
selected track to the nearest interval of the
specified value.

02: MdfGate (Modify gate time): Modify the

gate times (durations) of all notes in
specified measures of the selected track.

03: MdfyVel (Modify velocity): Modify the note-

on velocity values for all note events in
specified measures of the selected track.

04: Cresc (Crescendo): Create a gradual change

in note-on velocity over the specified mea-
sures of the selected track to create an effect
of crescendo or diminuendo.

05: Transps (Transpose): Transpose all notes in

specified measures of the selected track by a
specified interval.

06: ThinOut (Thin out): Conserve sequencer

memory by deleting approximately every
other occurrence of a specified type of con-
tinuous controller from specified measures of
the selected track.

07: ErsEvnt (Erase event): Erase all data of a

specified type from specified measures of the
selected track.

08: NtShift (Note shift): Shift all notes of a

specified note number in the selected track

to another note number.

09: MovCIck (Move clock): Move events in the

specified measures of the selected track
forwards or backward in time.

10: CpyMeas (Copy measure): Copy a specified

range of measures in the selected track(s)
to another location in the same track.

11: ErsMeas (Erase measure): Erase all data

from specified measures of the track, leaving
the measures empty.

12: DelMeas (Delete measure): Delete the

specified measures from the selected

track(s), and move the following measures
up to fill the gap.

13: CreMeas (Create measure): Insert empty

measures of the specified time signature into
the selected track(s) over the specified
range of measures.

14: MixTrck (Mix track): Combine the data of

specified measures from a specified track
with the data of another track.

15: ErsTrck (Erase track): Erase all data from

the selected track(s).

2 18

Song edit jobs 2

JUMP #606

Содержание SY99

























































































































































































































































































































































Результаты поиска

Содержание SY99

Отзывы:

Бренды по названию

Популярные бренды

Yamaha SY99, Руководство пользователя

Результаты поиска

Содержание SY99

Отзывы:

Бренды по названию

Популярные бренды