Yamaha SY99, Руководство пользователя

Страница: 185 / 344

VOICE EDIT MODE
DRUM SET DATA
3. Effect set
JUMP #212
Summary: Specify how the effect units are con-
nected, how the sound from each note of the
drum voice is sent to the effect units, parameters
for each effect unit, and how the effect param-
eters are controlled in realtime.
Procedure:
From: drum set job directory (JUMP #272)
Select: job 03:Effect Set (JUMP #212)
Select: the effect job you wish to edit
Move the cursor in this area and press ENTER to
select a job.
01: Effect Mode Select: Specify how the two
effect units are connected, the effect type,
and volume balance. This is exactly the
same as for a normal voice. Refer to Common
Data job 10.1 Effect Mode Select, page 106.
02: Effect Send: Specify how the sound of each
element of the voice will be sent to the effect
units. Refer to the following section Drum
set data 3.2 Effect Send.
03: Effect 1 Parameter: Make settings for effect
unit 1. This is exactly the same as for a nor-
mal voice. Refer to Common Data job 10.3
Effect 1 Parameter, page 108.
04: Effect 2 Parameter: Make settings for effect
unit 2. These parameters are exactly the
same as for Effect 1. Refer to Common Data
job 10.3 Effect 1 Parameter, page 108.
05: Effect Control: Specify how effect param-
eters will be affected by control change mes-
sages. This is exactly the same as for a
normal voice. Refer to Common Data job 10.5
Effect Control, page 123.
Pressing F1—F5 will select the corresponding job.
Note: Drum voice effect settings differ from normal
voice effect settings only in job 2.Effect Send. A
normal voice allows you to specify the effect
send level for each of the one, two, or four ele-
ments. A drum voice allows you to specify the
effect send level for each of the 76 keys.
3.1 Effect mode select
JUMP #213
Summary: Specify the effect mode to determine how
the two effect units are connected, the effect
type for each unit, effect output levels, and the
volume balance between processed and unpro-
cessed sound.
Procedure:
From: Effect Set job directory (JUMP #212)
Select: 01:Effect Mode Select (JUMP #213)
Specify: the effect mode, effect types, and effect
levels, and wet:dry balance.
Remarks: This function is exactly the same as that
described for normal voices. For details, refer to
Common Data job 10.1 Effect Mode Select, page
106.
1 7 4